You can move around with your keyboard
plus
minus
left
right
Drop pin on the map to start a new report
space
Press space again to adjust the location
space
Back to all reports

30 mph signs

Reported via desktop in the Pavement Defect (uneven surface / cracked paving slab) category anonymously at 13:23, Thursday 4 August 2022

Sent to TfL less than a minute later. TfL ref: FMS3730604.

Hi. Sorry, you don't have an option to report signage, so chose the closest option. Please can you take the 30 mph speed limit signs off and replace for 20 mph so that your signs are correct with the Lewisham High St speed limit. TfL changed Lewisham High street speed in July 2018 the entire length from Molesworth Street, Lewisham High St and Rushey Green is 20mph. Thanks.

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • Thank you for taking the time to report this to us. It is much appreciated. This has been investigated and has now been referred to our contractors. If this defect is confirmed as a safety issue this will be made safe within two hours. If a permanent repair is required, we will aim to carry it out within 28 days. Should you need anything else or have any questions, you may wish to contact our customer services team on 0343 222 1234

    Please also be aware that, all Action Scheduled reports are automatically closed after 28 days. However, the fault will be fixed within this timescale, which may be sooner, or in a few cases take a little longer

    State changed to: Action scheduled

    Posted by TfL at 13:28, Thursday 4 August 2022

  • The action scheduled for your report should now have been completed as detailed in your previous response. On some occasions it does take a little longer than scheduled. If you have any further queries on this, please either create a new report or contact our Customer Contact Centre on 0343 222 1234

    State changed to: Fixed

    Posted by TfL at 05:32, Friday 2 September 2022

This report is now closed to updates. You can make a new report in the same location.