You can move around with your keyboard
plus
minus
left
right
Drop pin on the map to start a new report
space
Press space again to adjust the location
space
Start new report here Reposition report here
Back to all reports

Traffic lights + push buttons missing

Reported via desktop in the Pedestrian wait button not working category anonymously at 13:56, Saturday 11 March 2023

Sent to TfL less than a minute later. TfL ref: FMS4301410.

This junction has always been a hot spot for RTC's - the crossing point has not had any form of safe crossing in months. No traffic lights and no push buttons.

I have attached a most recent photo and a photo to what the traffic lights should look like.

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • In hand with Traffic Signal Contractor. They have been chased about the works required on site. MF

    Posted by TfL at 14:03, Saturday 11 March 2023

  • Thank you for taking the time to report this to us. It is much appreciated. This has been investigated and we can confirm that there is a fault with the pedestrian wait button. We have therefore referred this to our contractors and it will be fixed within 28 days. Should you need anything else or have any questions, you may wish to contact our customer services team on 0343 222 1234

    Please also be aware that, all Action Scheduled reports are automatically closed after 28 days. However, the fault will be fixed within this timescale, which may be sooner, or in a few cases take a little longer

    State changed to: Action scheduled

    Posted by TfL at 22:00, Saturday 11 March 2023

  • The action scheduled for your report should now have been completed as detailed in your previous response. On some occasions it does take a little longer than scheduled. If you have any further queries on this, please either create a new report or contact our Customer Contact Centre on 0343 222 1234

    State changed to: Fixed

    Posted by TfL at 05:32, Sunday 9 April 2023

This report is now closed to updates. You can make a new report in the same location.